Figure 4-12-10: IP Source Guard Configuration screen page screenshot
The page includes the following fields:
Object Description
• Mode of IP Source
Guard
Configuration
Enable the Global IP Source Guard or disable the Global IP Source
Guard. All configured ACEs will be lost when the mode is enabled.
• Port Mode
Configuration
Specify IP Source Guard is enabled on which ports. Only when
both Global Mode and Port Mode on a given port are enabled, IP
Source Guard is enabled on this given port.
• Max Dynamic
Clients
Specify the maximum number of dynamic clients can be learned
on given ports. This value can be 0, 1, 2 and unlimited. If the port
mode is enabled and the value of max dynamic client is equal 0, it
means only allow the IP packets forwarding that are matched in
static entries on the specific port.
Buttons
: Click to save changes.
To Next Page
Loading...
Need help?
General
