Interlogix IFS NS3502-8P-2S User Manual

IFS NS3502-8P-2S User Manual
194
Figure 4-9-9: QoS Port DSCP Configuration page screenshot
The page includes the following fields:
Object Description
• Port
The Port column shows the list of ports for which you can
configure dscp ingress and egress settings.
• Ingress
In Ingress settings you can change ingress translation and
classification settings for individual ports.
There are two configuration parameters available in Ingress:
 Translate

Classify
• Translate
To Enable the Ingress Translation click the checkbox.
• Classify
Classification for a port has 4 different values.
 Disable: No Ingress DSCP Classification.
 DSCP=0: Classify if incoming (or translated if enabled) DSCP
is 0.
 Selected: Classify only selected DSCP for which
classification is enabled as specified in DSCP Translation
window for the specific DSCP.
 All: Classify all DSCP.
• Egress
Port Egress Rewriting can be one of -
 Disable: No Egress rewrite.
 Enable: Rewrite enable without remapped.
 Remap: DSCP from analyzer is remapped and frame is

Interlogix IFS NS3502-8P-2S Specifications

General

Brand	Interlogix
Model	IFS NS3502-8P-2S
Category	Switch
Language	English