â– Firmware upload/download via HTTP / TFTP
â– DHCP Relay
â– DHCP Option82
â– User Privilege levels control
â– NTP (Network Time Protocol)
â– Link Layer Discovery Protocol (LLDP) Protocol
â– Cable Diagnostic technology provides the mechanism to detect and report potential cabling
issues
â– Reset button for system reboot or reset to factory default
â– IFS Smart Discovery Utility for deploy management
â– ICMPv6
 Power over Ethernet
â– Complies with IEEE 802.3af Power over Ethernet End-Span PSE
â– Complies with IEEE 802.3at high-power Power over Ethernet End-Span PSE
â– Up to 8 ports for IEEE 802.3af / at devices powered
â– Support PoE Power up to 30.8 watts for each PoE ports
â– Auto detect powered device (PD)
â– Circuit protection prevent power interference between ports
â– Remote power feeding up to 100m
â– PoE Management
â– Total PoE power budget control
â– Pert port PoE function enable/disable
â– PoE Port Power feeding priority
â– Per PoE port power limit
â– PD classification detection
â– PD Alive-check
â– PoE schedule