Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not
yet up and running.
Ready: The server is enabled, IP communication is up and
running and the RADIUS module is ready to accept access
attempts.
Dead (X seconds left): Access attempts were made to this server,
but it did not reply within the configured timeout. The server has
temporarily been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left before this occurs
is displayed in parentheses. This state is only reachable when
more than one server is enabled.
RADIUS Accounting Servers
Object Description
• #
The RADIUS server number. Click to navigate to detailed statistics
for this server.
• IP Address
The IP address and UDP port number (in <IP Address> :< UDP
Port> notation) of this server.
• State
The current state of the server. This field takes one of the
following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not
yet up and running.
Ready: The server is enabled, IP communication is up and
running and the RADIUS module is ready to accept accounting
attempts.
Dead (X seconds left): Accounting attempts were made to this
server, but it did not reply within the configured timeout. The
server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
To Next Page
Loading...
Need help?
General
