iXBlue GAPS - Range Circle

GAPS - User Guide
6.5.3 RANGE CIRCLE
This tool is available in real-time and replay modes.
The range circle tool draws a circle around a mobile. The user sets the radius of the circle as
he wishes. This tools allows a quick evaluation of distance in a 3D display.
The tool is accessible via the button in the Equipment toolbar.
Figure 47 - Range circle around a ROV
Circle Radius
In order to edit the radius of the range circle, follow the procedure:
1. In the Project view, right click on the mobile around which you want to draw a circle and
select Properties in the menu that opens.
2. Open the Track Properties tab. Under Range circle, edit the Display range circle of radius
field.
MU-GAPS-AN-005-H - November 2019 109