GAPS - User Guide
6.5.10.2 Managing Event Marks
Event Mark
Files
When an event mark is created, it is added to a KML file. If no KML file exists at the time of the
event creation, then a KML file is automatically created, inserted under the Annotations /
Data Files / Annotation files directory and set by default to Active. You can edit the file
properties by right clicking on the event file in the Project view panel:
Figure 58 - Event mark data file and its pop-up menu
If you do not want the next created event mark to be written in the same file, unselect Active
in the pop-up menu. At the creation of the next event mark, a new KML file is created.
If you remove an event mark data file, all the event marks written in the data file are also
removed from the Project view panel.
Event Mark
Edition
You can perform a few operations directly on an event mark. In the Project view panel, under
Annotations / Features, if you right click on one event mark, a pop-up menu opens:
Figure 59 - Event mark pop-up menu
From the event mark pop-up menu you have access to the following items:
● Remove: the mark does not appear anymore in DELPH RoadMap (but is not deleted from
the KMLfile).
● Visible: you can hide or show the mark.
● Zoom to: you can set the view of the main graphic display to focus on the event mark.
● Delete: Event is deleted from the KML file and from the application.
● Properties: you edit the same parameters as explained during the event mark creation.
MU-GAPS-AN-005-H - November 2019 119
To Next Page
Loading...
