GAPS - User Guide
4 Configuring GAPS
The configuration of GAPS is carried out from the Web-based User Interface. Before having
access to the interface, you have to connect a computer to the system via the Ethernet link.
Once the system is inserted in the local network, you can launch the Web-based User
Interface and you configure the installation parameter and the survey parameters.
4.1 Web-Based User Interface General Overview
Environment
The Web-based User Interface has been optimized and qualified based on the environment
described on the release note delivered with your product. It is highly recommended to
upgrade your computer with the provided CD.
On a computer
The communication with the computer can be performed either directly through Ethernet link or
through a local network. The communication is made in an http or https domain which includes
encryption and secure identification of GAPS.
The Web-based User Interface is launched from the WEB browser hosted on the computer.
You enter the IP address of GAPS in the browser. See section 4.2.1.1.
Multi user
When several users are connected to the same Web-based User Interface:
● One of the users edits GAPS configuration and the others just watch the web pages: this
asks more CPU charge for the system but it should not freeze the interface.
● The different users edit simultaneously the GAPS configuration: this may lead to
confusion about the operation of the system and as well to the freeze of the interface. This
must be avoided !
MU-GAPS-AN-005-H - November 2019 47
To Next Page
Loading...
