GAPS - User Guide
5.3.3 ACTIVATING A TRANSPONDER
A transponder present in the database must be activated before being positioned.
1. Select SETUP > TRANSPONDERS.
2. Click on depending on which transponder you would like to activate.
The button becomes . The transponder is activated.
5.3.4 DELETING A TRANSPONDER
A transponder can be removed from the transponder list.
1. Select SETUP > TRANSPONDERS.
2. Click on Erase depending on which transponder you wish to delete.
The transponder disappears and has been deleted. The last transponder cannot be deleted.
MU-GAPS-AN-005-H - November 2019 91
To Next Page
Loading...
