GAPS - User Guide
> Storage Folder: complete path of the storage folder
> File Name: three ways to build the file name
- FileName_Mobile (line01_Vessel_trajectory)
- FileName_FileFormat_Mobile (line01_dat_Vessel_trajectory)
- User defined: your own file name
1. In the Project View panel, under Navigation, right click on the file from which you want to
export the trajectory.
The Trajectory Export window opens.
2. If the export File Format is Google Earth (KML), select the Z Level in the corresponding
scrolling list.
3. You may activate the Track and/or Positions options. If the export File Format is Google
Earth (KML), select the Color of these two options.
4. Expand the Output item and select a File Format, enter a Storage Folder path and choose
a File Name type.
5. Click on Start to run the export. You may select the Close window at the end of the
processing option and/or the Open processing result option if the File Format is Google
Earth (KML).
The completion state of the export process is displayed on the progress bar.
MU-GAPS-AN-005-H - November 2019 127
To Next Page
Loading...
