GAPS - User Guide
5. For a Serial link, set up the Parity, Stopbits, Standard and Baudrate.
6. For an Ethernet port, select the Transport Layer, the IP address (in the case of a TCP
Client Transport Layer) and the Port number.
7. In Beacon Selection enter the Beacon ID and its corresponding TP Code.
8. In Lever Arms enter the LV1, LV2 and LV3 values in meters.
9. Click on OK to validate your choices and to send the configuration in the INS.
MU-GAPS-AN-005-H - November 2019 133
To Next Page
Loading...
