GAPS - User Guide
Figure 77 - Handling GAPS
Do not hold GAPS by its hydrophones.
When GAPS is not used, the four hydrophones must keep their protection caps. Remove
them just before putting GAPS into water.
● The equipment must be placed back in its transport box and stored in a dry area until it is
installed. The equipment must always be stored in its packaging. The limits of storage
temperature are the following:
Item Min T° Max T°
Acoustic Array - 40°C +70°C
Acoustic Transponders - 20°C +70°C
Bad storage conditions may void certain clauses of the guarantee.
● Low Voltage Directive 2006/95/CE:
Only operate GAPS under water.
MU-GAPS-AN-005-H - November 2019 157
To Next Page
Loading...
