iXBlue GAPS - Page 33

GAPS - User Guide
Table 5 - FRONT face from left to right
Label Type
PPS
SYNC OUT 2 status light
SYNCIN Status light
ON /OFF Status switch and light
Table 6 - BACK face from left to right
Label Type
Power supply
• 24 – 36 VDC, 50 W (2 A) power supply
• 100 – 240 VAC, 50- 60 Hz power supply, automatically
detected, no adaptation needed
• Compartment with 2 fuses (1 A, 5x20 mm) ref: D1 TD : REF
SCHURTER 7030.332
GAPS SOURIAU 23-pins connector for the Acoustic Array cable
ETHERNET Access to network
SERIALA, B, C, D
4 DB9 connectors for RS232 or RS422/485 serial links (use of
straight cables)
SYNC IN, TRIGGER, PPS
2 BNC connectors. Acoustic recurrence triggered by an external
device (side-scan sonar for example)
SYNCOUT, MAIN,
SECONDARY
2 BNC connectors to trigger the transponder in responder mode
MU-GAPS-AN-005-H - November 2019 33