Keysight Technologies X Series Service Guide

490 Keysight N9010A EXA Service Guide
Assembly Replacement Procedures
RF Area (Option 503, 507, 513, 526)
7. Refer to Figure 15-19. Using the T-8 driver, remove the two 0515-1992
screws (3) to separate the #1 switch/bracket assembly (1)/(2) from the
low band switch bracket (4).
Figure 15-19 Switch 1 Removal

Keysight Technologies X Series Specifications

General

Brand	Keysight Technologies
Model	X Series
Category	Measuring Instruments
Language	English