NET Series
Introduction
Page 12 Firmware Ver. 1.00.42/Software Ver. 1.0.2.6 LEIGHTRONIX, INC.
2010-07-09
NET SERIES MODEL FEATURES/SPECIFICATIONS
MINI-T-NET NET-164 NET-EC
MECHANICS
Dimensions 2.75” H x 8.25” W x 6.5” D 3.50” H x 19.00” W x 8” D 1.75” H x 19.00” W x 8” D
Weight, without
carton or cables
3 lbs. 6 lbs. 4 lbs.
Display
24 Characters x 2 Lines
VFD
24 Characters x 2 Lines
VFD
24 Characters x 2 Lines
VFD
Keypad Arrow Matrix Arrow Matrix Arrow Matrix
NETWORK ACCESS
Remote Support Dial-Up Networking Dial-Up Networking Dial-Up Networking
Network Support
Integrated 10/100Base-T
Ethernet Port
Integrated 10/100Base-T
Ethernet Port
Integrated 10/100Base-T
Ethernet Port
Logging Internal Internal Internal
PROGRAMMING
Event Capacity 1000 1000 1000
Resource Library 1024 1024 1024
Control Mode Immediate & Scheduled Immediate & Scheduled Immediate & Scheduled
Video Detection Yes Yes N/A
Input/Output
Naming
Yes Yes Yes
DEVICE CONTROL
RS-232 Serial
Interfaces
“COM 1”: reserved for
future use/DB-9, male,
DTE interface
“COM 1”: reserved for
future use /DB-9, male,
DTE interface
“SWITCHER”: used for
external router control/DB-
9, male, DTE interface
PRO-BUS Control
Capacity
8 DVDs/VCRs 16 DVDs/VCRs 16 DVDs/VCRs
DVply Control for
TASCAM DV-
D6500 Cue
Title:Chapter
N/A 2 2
Switch Type Relay Active Matrix N/A
Video/Audio
Switching
(in x out)
Internal 8 x 1 VA Internal 16 x 4 VAA External 32 x 32
Video Connectors BNC BNC *
Video Standard NTSC, 75-ohm terminated NTSC, 75-ohm terminated *
To Next Page
Loading...
