NET Series
Controller Installation & Configuration
LEIGHTRONIX, INC. Firmware Ver. 1.00.42/Software Ver. 1.0.2.6 Page 35
2010-07-09
DNS ADDRESS CONFIGURATION STEPS CORRESPONDING SCREEN DISPLAYS
12. Either press “→” again to save your changes or
“←” to abort changes.
NOTE: Unit must be rebooted to apply any TCP/IP address changes (simultaneously press
“↓” and “→” and then press “↑”). Refer to “Rebooting Controller,” on page 126.
Press ~ to confirm
DNS #2 static address.
To Next Page
Loading...
