NET Series
Software Installation and Configuration
Page 58 Firmware Ver. 1.00.42/Software Ver. 1.0.2.6 LEIGHTRONIX, INC.
2010-07-09
2. Check the boxes in the “Channel/Misc” section to select the channels
that should be included for the selected days.
NOTE: The channel list varies depending on the Controller.
Check the “Export/print gaps” checkbox to display playlist gaps.
Check “Export/print all records” to include all events in the selected event
panes.
NOTE: This function overrides any export or print values set to “No” in the
device, library, or switch tab properties.
Add/remove playlist fields (columns) in template as follows:
Add a field to the “Used” list by double clicking a field item in the
“Available” list or selecting it and clicking “>>.” The fields in the “Used” list
will be printed/exported in the selection order listed.
To add a field at a specific point within the “Used” list, highlight the
“Used” display item you would like to display the new field before.
Double click a field item in the “Available” list or select it and click “>>.”
The new field is added above the selected field (select the blank field at
the bottom to add a field to the end of the list).
Remove a “Used” field, by double clicking it or selecting it and clicking
“<<.”
c. Click “Save” to save the template to a file.
2. To revise a template:
a. Click “Export/Print templates” in the “Tools” menu to open the window shown in
Illustration 31, “Export/Print Templates” Window.
b. Click “Load.” In the “Select Export/Print Template” Window that appears,
browse for the desired template and open. The filename will then appear in the
“Template” box at the top of the “Export/Print Templates” Window.
3. Click “Done” when finished to close the “Export/Print Templates” Window.
To Next Page
Loading...
