Leightronix MINI-T-NET - Page 75

NET Series
Software Installation and Configuration
LEIGHTRONIX, INC. Firmware Ver. 1.00.42/Software Ver. 1.0.2.6 Page 73
2010-07-09
 “Device”: enter the PRO-BUS address number of the device. Choices are:
 1 – 8 for the MINI-T-NET
 1 – 16 plus DVply-1 and DVply-2 for the NET-164 and NET-EC
 Ensure that “Format” and “Device” agree when selecting DVply.
NOTES:
 Ensure assigned device number reflects actual PRO-BUS
interface connected to input device. A PRO-BUS interface only
responds to those PRO-BUS commands which contain its
address.
When a device number is chosen, it is removed from the “Device” list.
 “Setup time”:
NOTE: This field appears after “Format” is selected.
 For a DVply device, enter time it takes to cue a title:chapter.
 For all other devices, enter time it takes to produce video after receiving a
play command.
 “Print” and “Export”: select “Yes” if you want an event to be included in a print or
export operation.