90-13645--2 1095
5A-17
LOWER UNIT
IMPORTANT: Upper drive shaft bearing/sleeve
must be removed prior to oil sleeve removal. Re-
fer to “Upper Drive Shaft Bearing,” preceding.
Oil Sleeve
1. Remove oil sleeve (if necessary) using Puller As-
sembly (91-83165M) with suitable jaws.
19222
a
b
a - Oil Sleeve
b - Puller Assembly (91-83165M)
IMPORTANT: Upper drive shaft bearing/sleeve
and oil sleeve do not have to be removed for lower
drive shaft bearing race removal.
Lower Drive Shaft Bearing Race
IMPORTANT: Retain shim(s) for reassembly.
1. Remove race and shim(s) using bearing race tool
(91-14308A1).
19171
a
b
c
a - Race
b - Shim(s)
c - Bearing Race Tool (91-14308A1)
To Next Page
Loading...
