Mariner 80 - Installation

2B-26 90-13645--2 495ELECTRICAL AND IGNITION
Installation
1. Install 2 rubber collars and 2 rubber bumpers.
11645
a
b
a
a - Rubber Collars
b - Rubber Bumpers
2. Install components as shown.
3. Connect battery leads to battery.
19452
a
b
c
d
e
f
g
h
i
j
k
l
i
a - Starter
b - Rubber Mount, oil tank
c - Clamp, upper
d - BLACK Cable
e - Bolt and Lockwasher
f - Clamp, lower
g - J-Clip (If Equipped)
h - BLACK Negative (-) Battery Cable
i - Bolts [Torque to 14.5 lb. ft. (19.7 N·m)]
j - Fuse Holder (If Equipped)
k - YELLOW Cable [Torque to nut to 60 lb. in. (6.7 N·m)]
l - Fuse Holder (If Equipped)