5A-22 LOWER UNIT 90-13645--2 1095
12. Install thrust bearing . Coat thrust bearing with
Quicksilver Gear Lubricant (92-13783A24).
19168
a
a - Thrust Bearing
13. Install reverse gear.
19202
a
a - Reverse Gear
Forward Gear Reassembly
1. Press bearing onto gear (press only on inner race
of bearing).
51869
a
b
a - Mandrel (91-37350)
b - Bearing; Lubricate I.D. with Quicksilver 2-4-C w/Teflon
2. Apply 2-4-Cw/Teflon to bore in center of gear.
3. Press bearing into gear until bearing bottoms out.
NOTE: Do not apply pressing force AFTER bearing
bottoms out as bearing damage could result.
28062
a
b
a - Mandrel
b - Bearing, Numbered Side Toward Mandrel
To Next Page
Loading...
