Midas PRO2 User Manual

Selecting scope parameter sections 181
PRO2 Live Audio System
Owner’s Manual
>> To select a single parameter section console wide
1 Click CONSOLE WIDE.
2 In any channel, click the desired
parameter section. For example,
clicking the fader parameter of
input channel 1 selects the fader
parameter of every channel.
>> To select every parameter section on the console
Click ALL. Every parameter section on
the Recall Scope screen is selected (as
shown right).
>> To deselect a parameter section(s)
Follow the procedures for selecting parameters, but only click ones that are already
selected.

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal