Midas PRO2

222 Chapter 28: Delay Compensation (Latency)
PRO2 Live Audio System
Owner’s Manual
• XLR – IP – AS (With GEQ) – MTX (With GEQ)
FOH Mix Low Latency
The following table shows the delay compensation settings for this mix.
The following example signal paths all measure the same latency of 366 samples @
96kHz = 3.81 ms:
• FOH XLR – IP – MAST – XLR
• XLR – IP – MAST – XLR
• XLR – IP – MTX – XLR
• XLR – IP – AS - MAST – XLR
• XLR – IP – AS – INS – MAST – XLR
• XLR – IP – AS – INS – MAST (With GEQ) – XLR
• XLR – IP – AS – INS – MAST DI (Mix)
• XLR – IP – AS – INS – MTX DI (Mix)
• XLR – MAST DI (Input)
• XLR – MTX DI (Input)
• XLR – AS DI – MAST – XLR
• XLR – AR (Input) – MAST – XLR
• XLR – IP – MAST – MTX
• XLR – IP – AS – MAST (With GEQ)
• XLR – IP – AS – MTX (With GEQ)
Option On/off status
Master to Matrix Post-processing Off
Input Channels
Insert Off
Aux Sends
Monitor Mode (Align with Masters)
Insert
Send-FX-Return
Graphic EQ
Off
Off
On
Off
Master and Matrix
Insert
Graphic EQ
Off
On