90
C
USTOMIZING YOUR PHONE DISPLAY
NOTE:
1. Access to the Custom Ringtones Web UI menu is only available if enabled by your System Adminis-
trator.
2. Ringtones must be in .wav format. The IP phones support the following WAV file specifications:
– G.711 μ-law and a-law Codec
– 20 ms packet size
– Mono 8KHz
3. Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight WAV files cannot
exceed 8 MB).
4. Filenames must contain only ASCII characters.
1. Click on Basic Settings > Custom Ringtones.
2. Press the Browse... button corresponding to the desired ringtone position (e.g. 1).
3. Navigate to the folder containing the WAV file you want to upload, select the file using your left mouse
button, and press the Open button.The filename should now be displayed to the right of the respective
Browse... button.
4. Press the Upload button to upload the file to the phone.
5. Repeat Steps 2 to 4 to upload additional WAV files to the phone.
NOTE: Press the Delete button to delete the desired ringtone from your phone.
Display
The Display option allows you to set the following on your phone:
• Home Screen Settings:
• Screen Mode
• Show Picture
• Screen Saver Timer
• Brightness Settings:
To Next Page
Loading...
