128
C
ONFIGURING SOFTKEYS SPEED DIAL/MWI
Configuring a Speed Dial/Conf Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
keys.
3. In the Type field, select Speed Dial/Conf.
4. In the Label field, enter a label for the Speed Dial/Conf key.
5. In the Value field, enter the speed dial extension or the extension to add to the conference (for
example, 3600).
6. In the Line field, select the line for which you want to use the key functionality.Valid values are:
– global
– 1through24
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
8. Select from Key 1 through Key 84(M695).
9. In the Type field, select Speed Dial/Conf.
10. In the Value field, enter the speed dial extension or the extension to add to the conference (for
example, 3600).
11. In the Line field, select the line for which you want to use the key functionality.Valid values are:
– global
– 1through24
12. Click Save Settings.
Speed Dial/MWI
Speed Dial/MWI Note: Speed Dial/MWI functionality can only be programmed on the top softkeys.
To Next Page
Loading...
