257
M
ITEL INTEGRATED DECT HEADSET REPLACING THE HEADSET
NOTE: For how to install the Mitel DECT Headset to your 6940 SIP phone or the Mitel M695 Programmable
Key Module, see the Mitel Integrated DECT Headset Installation Guide.
Replacing the Headset
If the Integrated DECT Headset is malfunctioning, or if you have paired a wrong Integrated DECT Headset
with the base, you must replace and repair the Integrated DECT Headset.
To replace and repair the Integrated DECT Headset:
1. Remove the headset from the base.
2. Turn off the headset by pressing the Answer/end button for 5 seconds until the led on the headset
blinks 3 times quickly.
3. Dock the new headset in the base. Press the Answer/end button for 1 to 2 seconds, the new headset
is paired with the base.
Microphone muted
Active audio between headset and base
Searching for headset (flashing)
LED indicator Description
To Next Page
Loading...
