19
G
ETTING STARTED VOICE SERVICES
Check that the cables are tightly connected to the phone and to the wall jack. The phone should automat-
ically detect when it is reconnected and remove the Network Disconnected prompt from the screen.
However, if changes have been made to your phone’s network settings, you may need to restart your
phone. Check with your System or Network Administrator for assistance.
For more information about connecting your phone, see the Mitel 6940 IP Phone Installation Guide.
NOTE: If the phone displays a No Service status message you can still use the phone but note that it is
not registered with the Registrar. For more information about registering your phone, contact your System
Administrator.
Voice Services
The 6940 SIP phone can be configured to provide remote workers access to the same rich communica-
tions capabilities as in-office workers using Voice Services.
NOTE: Voice Services should be configured by your System Administrator or under his/her direction.
Changing the Voice Services settings can have detrimental effects on phone behavior. Contact your
system administrator for more information.
UI Overview
Home Screen
When the phone has successfully updated the configuration and connected to the network, the phone
displays the Home screen. The Home screen displays the current line, your name (SIP screen name),
the date and time, and various important status messages. It is the default screen displayed when the
phone is in idle state.
NOTE: Your System Administrator should have configured your SIP screen name, line number, and any
other administrative features required. If your name does not display on the screen, contact your System
Administrator.
Phone/Line Status Indicators and Messages
To Next Page
Loading...
