Mitel 6940w - Configuring a Sprecode Key Using the Mitel Web UI; Park;Pickup Keys

121
C
ONFIGURING SOFTKEYS PARK/PICKUP KEYS
activates a service provided by the server. The value you enter for this field is dependent on the services
provided by the server. Contact your System Administrator for information about available services.
Configuring a Sprecode Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
keys.
3. In the Type field, select Sprecode.
4. In the Label field, enter a label to display on the IP phone for this key.
5. In the Value field, enter the appropriate value for accessing specific services from the server.
NOTE: For values to enter in this field, contact your System Administrator.
6. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84(M695).
8. In the Type field, select Sprecode.
9. In the Value field, enter the appropriate value for accessing specific services from the server.
NOTE: For values to enter in this field, contact your System Administrator.
10. Click Save Settings.
Park/Pickup Keys
The 6940 phone has a park and pickup call feature that allows you to park a call and pickup a call when
required.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Park key to park the
call