Mitel 6940w - Received Callers List Key; Configuring a Received Callers List Key Using the Mitel Web UI

132
C
ONFIGURING SOFTKEYS RECEIVED CALLERS LIST KEY
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, selectDirectory.
8. Click Save Settings.
Received Callers List Key
By default, the 6940 has a dedicated Received Callers List key. However, using the Mitel Web UI, you
can assign the Received Callers Listkey to any key on the top or bottom keys on the phone.
The Received Callers List is a stored log of your incoming calls. You can use the Received Callers List
key to access a list of callers that called your phone.
NOTE: For more information about the Received Callers List, see “Received Callers List” on page 178.
Configuring a Received Callers List Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module
<N>.