Mitel 6940w - Call Forward; Lock; Password; Configuring a User Password

75
C
USTOMIZING YOUR PHONE CALL FORWARD
9. Press the Test softkey to begin testing.A green awill appear if there are no issues with the authenti-
cation/connection to the external source. A red ! will appear if issues are found. If there are issues
with your connection, please check your username and password for any errors.
10. Press the Save softkey to save your changes.
Call Forward
NOTE: For Call Forward information and configuration details, see “Call Forward Configuration”.
Lock
Password
This category allows you to change the user password for your phone. Changing your password ensures
that only you can alter your phone settings and helps keep your system secure. You can change your
user password using the IP phone UI or the Mitel Web UI.
CONFIGURING A USER PASSWORD
If unsupported characters are present in the user password or if the password length exceeds 15 charac-
ters in the configuration file then the phone uses the default password. The default password for user is
blank.
The following full character sets are supported:
• 0-9
• A-Z
• a-z
• +.:;=_,-'&()$!*/@
NOTE: User password does not support space and pound in the configuration file.
Setting a User Password Using the IP Phone UI
1. Press on the phone to enter the Options List.
2. Press the Lockicon.