80
C
USTOMIZING YOUR PHONE DIAGNOSTICS
3. Click on Operation > Phone Lock.
4. In the Unlock the Phone? field, click Unlock.
Diagnostics
The Diagnostics menu allows you to perform the following diagnostic routines:
• Audio Diagnostics
• Ping
• TCP DUMP
• DHCP Trace
NOTE: The Diagnostics settings should only be used by your System Administrator or under his/her direc-
tion. Contact your system administrator for more information.
Audio
The Audio option on the IP phone allows you to set the audio mode for your IP phone, configure headset
settings, and personalize ring tones and tone sets.
Audio Mode
The 6940 allows you to use a handset, a USB or Bluetooth headset, or handsfree mode to handle
incoming and outgoing calls. The Audio Mode option provides different combinations of these three
methods to provide maximum flexibility in handling calls. There are four audio mode options you can set:
Audio Mode Option Description
Speaker This is the default setting. Calls can be made or received using the
handset or handsfree speakerphone. In handset audio mode,
pressing the button on the phone switches to handsfree
speakerphone. In Speaker audio mode, lift the handset to switch to
the handset.
Headset Choose this setting if you want to make or receive all calls using a
handset or headset. Calls can be switched from the handset to
headset by pressing the button on the phone. To switch from
the headset to the handset, lift the handset.
Speaker/Headset Incoming calls are sent to the handsfree speakerphone first when
the button is pressed. By pressing the button again, you can
switch back and forth between the handsfree speakerphone and
the headset. At anytime, lifting the handset switches back to the
handset from either the handsfree speakerphone or the headset.
To Next Page
Loading...
