Mitel 6940w - Configuring Lock Settings Using the Mitel Web UI

78
C
USTOMIZING YOUR PHONE CALL FORWARD
Unlocking the Phone Using the IP Phone UI
1. Press on the phone to enter the Options List (or press a configured Unlock softkey).
2. At the Enter Unlock Password prompt, enter your user password and press the blueEnter key.
3. At the Unlock the phone? prompt, press Yes.
Configuring Lock Settings Using the Mitel Web UI
Setting a User Password
1. Click on Operation > User Password.
2. In the Current Password field, enter the current user password.
NOTE: By default, the user name is user (all lowercase) and the password field is left blank
3. In the New Password field, enter the new user password.
4. In the Password Confirm field, enter the new user password again.
5. Click Save Settings.
Resetting a User Password
If you forget your password, you can reset it and enter a new password. The reset user password feature
resets the password to the factory default which is blank (no password). You can reset a user password
using the Mitel Web UI only.