Mitel 6940w - Conference Key; Configuring a Conference Key Using the Mitel Web UI; Transfer Key

135
C
ONFIGURING SOFTKEYS CONFERENCE KEY
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, selectRedial.
8. Click Save Settings.
Conference Key
Using the Mitel Web UI, you can assign a Conference key to any key on the top or bottom keys on the
phone.
NOTE: For more information about conferencing, see “Conferencing Calls” on page 158 .
Configuring a Conference Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
keys.
3. In the Type field, selectConference.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, selectConference.
8. Click Save Settings.
Transfer Key
Using the Mitel Web UI, you can assign the Transfer key to any key on the top or bottom keys on the
phone.