147
M
AKING CALLS USING A HEADSET
NOTE:
1. For more information about Bluetooth headset support, see “Bluetooth” on page 66.
2. For instructions on how to manually override the audio mode, see “Audio Mode” on page 80.
Contact your telephone equipment retailer or distributor to purchase a compatible headset.
NOTE:
1. Customers should read and observe all safety recommendations contained in headset operating
guides when using any headset.
2. Contact your System Administrator for questions regarding supported headsets.
Volume Controls for the Headset Microphone
On the 6940, there are three options for the headset microphone volume: Low, Medium, and High. For
information about configuring the headset microphone volume, see “Headset” on page 82.
Making and Receiving Calls Using a Headset
1. Ensure that you have selected a headset audio mode (see “Configuring the Audio Mode
Using the IP Phone UI” on page 81.
2. If you have a USB headset, insert the USB plug into the USB port (see the Mitel 6940 SIP IP Phone
Installation Guide for more information)orPair and connect your Bluetooth headset (see
“Bluetooth” on page 66).
3. Press the key to obtain a dial tone or to answer an incoming call. Depending on the audio
mode selected from the Options List, a dial tone or an incoming call is received on either the headset
or the handsfree speakerphone.
4. Press the key to end the call.
To Next Page
Loading...
