Mitel 6940w - Creating Dialpad Speed Dial Keys Using the Mitel Web UI

110
C
ONFIGURING SOFTKEYS SPEED DIAL KEY
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this key. If you
enter a speed dial prefix, you must enter the + character at the end of the prefix number (for example,
123456+).
6. In the Line field, select a line to apply to this key. Valid values are 1through24.
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
8. Select from Key 1 through Key 84(M695).
9. In the Type field, select Speed Dial to apply to the key.
10. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this key. If you
enter a speed dial prefix, you must enter the + character at the end of the prefix number (for example,
123456+).
11. In the Line field, select a line to apply to this key. Valid values are 1 through 24.
12. Click Save Settings.
Creating Dialpad Speed Dial Keys Using the Mitel Web UI
1. Click on Operation > Keypad Speed Dial.
2. Select a key from 1through9.
3. In the input box, enter the phone number, extension, or speed dial prefix to apply to this digit key. If
you enter a speed dial prefix, you must enter the + character at the end of the prefix number (for
example, 123456+).
4. In the Line field, select a line for which to apply the speed dial to. Valid values are 1through24.
5. Click Save Settings.