Mitel 6940w - Configuring an XML Key Using the Mitel Web UI; Accessing the XML Service Using the IP Phone UI

119
C
ONFIGURING SOFTKEYS XML KEY
Configuring an XML Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
keys.
3. In the Type field, select XML.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter a URI(s) to apply to this key.
NOTE: Contact your System Administrator for the appropriate value(s) to enter in the Value field.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84(M695).
8. In the Type field, select XML.
9. In the Value field, enter a URI(s) to apply to this key.
NOTE: Contact your System Administrator for the appropriate value(s) to enter in the Value field.
10. Click Save Settings.
Accessing the XML Service Using the IP Phone UI
After an XML application(s) has been saved to your IP phone and a key has been configured to access
the XML applications, the customized service is ready for you to use.
1. Press the XML softkey on the 6940 phone. An XML screen displays.
2. Swipe up and down to scroll through the list of customized features.