Mitel 6940w - Configuring an Empty Key Using the Mitel Web UI; None Key

143
C
ONFIGURING SOFTKEYS NONE KEY
Configuring an Empty Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
keys.
3. In the Type field, selectEmpty.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
5. Select from Key 1 through Key 84(M695).
6. In the Type field, selectEmpty.
7. Click Save Settings.
None Key
Use the following procedure to delete a key’s functionality on the 6940 IP phone.