164
H
ANDLING CALLS TRANSFERRING CALLS
3. Press the softkey configured for Directory functionality and press a directory entry and then the
desired number.
NOTE: If you have any additional Directory sources configured, you will need to first navigate to the
desired Directory folder and then highlight the respective entry or number.
4. Complete either a blind or consultative transfer:
1. To complete a blind transfer, press Dial softkey to call the contact and then press the Xfer softkey
before the receiving end answers.
2. To complete a consultative transfer, press Dial softkey to call the contact. Remain on the line to speak
with Party 2 before pressing the press the softkey configured with Transfer functionality or Xfersoftkey
again to transfer Party 1 to Party 2.
To cancel the transfer, press the Cancelsoftkey on the display screen or press .
To Next Page
Loading...
