Mitel 6940w - Page 218

To Next Page

To Previous Page

207

DND

AND CALL FORWARD USING CALL FORWARD THROUGH THE IP PHONE UI

5. Enter forwarding numbers using the dialpad keys or on-screen keyboard for any of the following

states:

– All: Forwards all incoming calls for the respective account to the specified number.

– Busy: Forwards incoming calls to a specified number if DND has been enabled for that account OR

if the account is currently engaged in another call.

– No Answer: Forwards incoming calls to a specified number if the call has not been answered for the

specified number of rings.

NOTE:

i. If All and Busy and No Answer are all enabled (and/or if the account has DND enabled), the

All settings take precedence over Busy and No Answer.

ii. Pressing the CopyToAll key copies the call forward number of the Call Forward mode in

focus to every Call Forward mode of that account. For example, if you have the cursor

pointing at the All state and has a call forward phone number configured, pressing the

CopytoAllkey assigns the same phone number to the Busy and No Answer states as well.

6. If configuring a forwarding number for the No Answer state, press the No. Ringsfield and press the

left or right arrow button to change the desired number of rings.

7. Press the On checkbox beside the respective Call Forward mode to enable the Call Forward mode.

8. Press the Savesoftkey to save your changes.

Call Forward in Phone Mode

1. Press the configured Call Fwdsoftkey or press and then the Call Forward icon.The Call

Forward screen displays and is applicable to all accounts configured on the phone.