87
C
USTOMIZING YOUR PHONE AUDIO
You configure global ring tones and tone sets using the IP phone UI and Mitel Web UI. Installing a custom
ring tone can be performed using the Mitel Web UI only.
Configuring Ring Tones Using the IP Phone UI
Global configuration only
1. Press on the phone to enter the Options List.
2. Press the Audio icon.
3. Press the Ring Tones icon.
4. Choose the desired ring tone (Velocity, Skyline, Rise, Daybreak, After Hours, Open Road, Pronto,
Voyage, Bloom, Move, Tone 1 through Tone 15, Silent, or any custom ring tones installed).
5. Press the Save softkey to save your changes.The ring tone you select is immediately applied to the
IP phone.
Configuring Tone Sets Using the IP Phone UI
Global configuration only
1. Press on the phone to enter the Options List.
2. Press the Audio icon.
3. Press the Tone Sets icon.
To Next Page
Loading...
