Moog SmartMotor User Manual

Introduction
Moog Animatics SmartMotor™ Developer's Guide,Rev. L
Page 30 of 909
Communication Lockup Wizard
Improper use of some commands, like Z and OCHN, can lock you out of the motor and
prevent further communication. If you are unable to communicate with the SmartMotor, you
may be able to recover communications using the Communication Lockup Wizard, which is on
the SMI software Communications menu (see the following figure). This tool sends an "E"
character to the motor at startup, which prevents the motor from running its program. For
more details on the Communication Lockup Wizard, see the SMI software online help, which is
accessed by pressing the F1 key or selecting Help from the SMI software main menu.
Communication Menu - Communication Lockup Wizard
Safety Information
This section describes the safety symbols and other safety information.
Safety Symbols
The manual may use one or more of the following safety symbols:
WARNING: This symbol indicates a potentially nonlethal mechanical hazard,
where failure to follow the instructions could result in serious injury to the
operator or major damage to the equipment.
CAUTION: This symbol indicates a potentially minor hazard, where failure to
follow the instructions could result in slight injury to the operator or minor
damage to the equipment.
NOTE: Notes are used to emphasize non-safety concepts or related information.
Introduction: Communication Lockup Wizard

Moog SmartMotor Specifications

General

Brand	Moog
Model	SmartMotor
Category	Servo Drives
Language	English