Device Configuration 5 - 19
Figure 5-11 Profile Adoption screen
5. Define the Preferred Group used as optimal group of Virtual Controller for adoption. The name of the preferred group
cannot exceed 64 characters.
6. Select the VLAN option to define a VLAN the access point’s associating Virtual Controller AP is reachable on. VLANs 0 and
4,095 are reserved and cannot be used. This setting is disabled by default.
7. Set the following Auto-Provisioning Policy settings for access point adoptions:
8. Define the Hello Interval value in seconds.
The Hello interval is the interval between two consecutive hello keep alive messages exchanged between the access point
and the adopting wireless controller. These messages serve as a connection validation mechanism to ensure the
availability of the adopting wireless controller. Use the spinner to set a value from 1 - 120 seconds.
9. Define the Adjacency Hold Time value. This value sets the time after which the preferred controller group is considered
down and unavailable to provide services. Use the spinner to set a value from 2 - 600 seconds.
Auto-Provisioning
Policy
Select an auto provisioning policy from the drop-down menu. To create a
new auto provisioning policy, select the Create icon or modify an existing
one by selecting the Edit icon.
Learn and Save Network
Configuration
Select this option to learn and save the configuration of any device
requesting adoption. This setting is enabled by default.
To Next Page
Loading...
