11 - 8 WiNG 5.6 Access Point System Reference Guide
The Real Time NETCONF Messages area lists an XML representation of any message generated by the system. The
main display area of the screen is updated in real time.
Refer to the Request Response and Time Taken fields on the bottom of the screen to assess the time taken to receive
and respond to requests. The time is displayed in microseconds.
4. Use the Clear button to clear the contents of the Real Time NETCONF Messages area. Use the Find parameter and the
Next button to search for message variables in the Real Time NETCONF Messages area.
11.3.2 View UI Logs
Advanced
Use the View UI Logs screen to view the log messages generated by the device. Logs are classified as Flex Logs and Error
Logs. These logs provide a real-time look into the state of the device and provide useful information for debugging and trouble
shooting issues.
To display the logs:
1. Select Diagnostics.
2. Select Advanced to display the UI Debugging menu options.
3. Select the View UI Logs menu item to display the logs. By default, the Flex Logs screen displays.
Figure 11-6 View UI Logs - Flex Logs tab
The Sequence (order of occurrence), Date/Time, Type, Category and Message items display for each log option selected.
Use the Clear All button to clear all logs shown in this screen.
4. Select the Error Logs tab to display the error logs for this device.
To Next Page
Loading...
