Motorola WiNG 5.6 - Viewing Device Summary Information

12 - 26 WiNG 5.6 Access Point System Reference Guide
8. Use the Start button to start packet capture. Use Stop to stop the capture.
9. Use Close to close this screen.
12.1.6 Viewing Device Summary Information
 Devices
Use the Summary screen to assess whether a device’s firmware or configuration file requires an update to the latest feature
set and functionality. To view the Summary screen:
1. Select Operations.
2. Select Devices.
3. Use the navigation pane on the left to navigate to the device to manage the firmware and configuration files on and select
it.
The Device Details Summary screen displays by default. when the Operations menu item is selected from the main
menu.
Filter by IP Select this to enable filtering the capture dropped packets based on the IP address of a device.
IP Protocol Select this to enable filtering the capture packets on specific protocols. The protocols can be
select from the drop-down list. The default protocol is TCP.
Port Select this option to enable filtering capture packets on specific ports. Use the spinner to set
the port number. The default port number is 1.
NOTE: When displaying the Summary screen at the RF Domain level of the UI’s hierar-
chal tree, the screen does not display a field for a device’s Primary and Secondary
firmware image. At the RF Domain level, the Summary screen just lists the Hostname,
MAC Address, Online status, Device Type and Is Controller designations for the devices
comprising the selected RF Domain. A RF Domain must be selected from the hierarchal
tree and expanded to list the devices comprising the RF Domain. From there, individual
controllers, service platforms and access points can be selected and their properties
modified.