Motorola WiNG 5.6 - Advanced Profile Configuration; Advanced Profile Client Load Balancing

Device Configuration 5 - 181
5.2.13 Advanced Profile Configuration
 System Profile Configuration
An access point profile’s advanced configuration is comprised of defining connected client load balance settings, a MINT
protocol configuration and miscellaneous settings (NAS ID, access point LEDs and RF Domain Manager).
To set an access point profile’s advanced configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices.
3. Select System Profile from the options on left-hand side of the UI.
4. Expand the Advanced menu item.
The following items are available as advanced access point profile configuration options:
• Advanced Profile Client Load Balancing
• Configuring MINT Protocol
• Advanced Profile Miscellaneous Configuration
5.2.13.1 Advanced Profile Client Load Balancing
 Advanced Profile Configuration
Use the screen to administer the client load across an access point’s radios. AP7131 models can have from 1-3 radios depending
on the SKU. AP6522, AP6522M, AP6532, AP6562, AP8132, AP8232, AP7131, AP7181 and AP7161 models have 2 radios, while
AP6511 and AP6521 models have a single radio.
1. Select Client Load Balancing from the expanded Advanced menu.