Statistics 13 - 57
13.3.1 Health
Access Point Statistics
The Health screen displays a selected access point’s hardware version and software version. Use this information to fine tune
the performance of an access point. This screen should also be the starting point for troubleshooting an access point since it’s
designed to present a high level display of access point performance efficiency.
To view the access point health:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
connected access points.
3. Select Health.
Figure 13-33 Access Point - Health screen
The Device Details field displays the following information:
Hostname Displays the AP’s unique name as assigned within the network. A hostname is assigned to a
device connected to a computer network.
Device MAC Displays the MAC address of the AP. This is factory assigned and cannot be changed.
Primary AP Displays the IP address of assigned to this device either through DHCP or through static IP
assignment.
Type Displays the access point’s model type.
Model Number Displays the access point’s model number to help further differentiate the access point from
others of the same model series and defined country of operation.
To Next Page
Loading...
