Motorola WiNG 5.6 - Wireless Lans

13 - 26 WiNG 5.6 Access Point System Reference Guide
13.2.7 Wireless LANs
 RF Domain Statistics
The Wireless LANs screen displays the name, network identification and radio quality information for the WLANs currently
being utilized by RF Domain members.
To view wireless LAN statistics for RF Domain members:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select Wireless LANs from the RF Domain menu.
Figure 13-16 RF Domain - Wireless LANs screen
The Wireless LANs screen displays the following:
WLAN Name Displays the name assigned to each WLAN upon its creation within the network.
SSID Displays the Service Set ID (SSID) assigned to the WLAN upon its creation within the network.
Traffic Index Displays the traffic utilization index of each listed WLAN, which measures how efficiently the
traffic medium is used. It’s defined as the percentage of current throughput relative to the
maximum possible throughput. Traffic indices are: 0 – 20 (very low utilization), 20 – 40 (low
utilization), 40 – 60 (moderate utilization), and 60 and above (high utilization).
Radio Count Displays the number of radios deployed in each listed WLAN by RF Domain member devices.
Tx Bytes Displays the average number of packets (in bytes) sent on each listed RF Domain member
WLAN.
Tx User Data Rate Displays the average data rate per user for packets transmitted on each listed RF Domain
member WLAN.
Rx Bytes Displays the average number of packets (in bytes) received on each listed RF Domain member
WLAN.