Motorola WiNG 5.6 - DHCP Bindings

13 - 114 WiNG 5.6 Access Point System Reference Guide
13.3.22.1 DHCP Bindings
 DHCP Server
The DHCP Binding screen displays DHCP binding expiry time, client IP addresses and their MAC address.
To view a network’s DHCP Bindings:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
connected access points.
3. Select DHCP and expand the menu to reveal its sub menu items.
4. Select Bindings.
Figure 13-74 Access Point - DHCP Server Bindings screen
The DHCP Bindings screen displays the following:
Expiry Time Displays the expiration of the lease used by a requesting client for DHCP resources.
IP Address Displays the IP address for each DHCP resource requesting client.
DHCP MAC Address Displays the hardware encoded MAC address (client Id) of each DHCP resource requesting
client.
Clear Select a table entry and select Clear to remove the client from the list of devices requesting
DHCP services.
Clear All Select Clear All to remove all listed clients from this list of DHCP resource requesting clients.
Refresh Select Refresh to update the statistics counters to their latest values.