7 - 42 WiNG 5.6 Access Point System Reference Guide
7.7 IPv6 Router Advertisement Policy
Network Configuration
An IPv6 router policy allows routers to advertise their presence in response to solicitation messages. After receiving a neighbor
solicitation message, the destination node sends an advertisement message. which includes the link layer address of the
source node. After receiving the advertisement, the destination device replies with a neighbor advertisement message on the
local link. After the source receives the advertisement it can communicate with other devices.
Advertisement messages are also sent to indicate a change in link layer address for a node on the local link. With such a
change, the multicast address becomes the destination address for advertisement messages.
To define a IPv6 router advertisement policy:
1. Select Configuration > Network > IPv6 Router Advertisement Policy.
Figure 7-24 Network IPv6 Router Advertisement Policy screen
2. Select Add to create a new IPv6 router advertisement policy, Edit to modify the attributes of a selected policy or Delete
to remove obsolete policies from the list of those available. Existing policies can be copied or renamed as needed.
To Next Page
Loading...
