Motorola WiNG 5.6 - Certificate Creation

12 - 60 WiNG 5.6 Access Point System Reference Guide
12. Select OK to export the defined RSA key. Select Cancel to revert the screen to the last saved configuration.
13. To optionally delete a key, select the Delete button from within the RSA Keys screen. Provide the key name within the
Delete RSA Key screen and select the Delete Certificates option to remove the certificate the key supported. Select OK
to proceed with the deletion, or Cancel to revert back to the last saved configuration.
12.2.3 Certificate Creation
 Certificates
The Certificate Management screen provides the facility for creating new self-signed certificates. Self signed certificates
(often referred to as root certificates) do not use public or private CAs. A self signed certificate is a certificate signed by its own
creator, with the certificate creator responsible for its legitimacy.
To create a self-signed certificate that can be applied to a device:
1. Select Operations.
2. Select Certificates.
3. Select Create Certificate.
IP Address If using Advanced settings, enter IP address of the server used to export the RSA key. This
option is not valid for cf and usb1 - 4.
Hostname If using Advanced settings, provide the hostname of the server used to export the RSA
key. This option is not valid for cf and usb1 - 4.
Username/Password These fields are enabled if using ftp or sftp protocols. Specify the username and the
password for that username to access the remote servers using these protocols.
Path/File If using Advanced settings, specify the path to the key. Enter the complete relative path
to the key on the server.