Device Configuration 5 - 117
6. Select the OK button to save the changes to the LLDP configuration. Select Reset to revert to the last saved configuration.
5.2.6.14 Miscellaneous Network Configuration
Profile Network Configuration
A profile can be configured to include a hostname in a DHCP lease for a requesting device and its profile. This helps an
administrator track the leased DHCP IP address by hostname for the supported device profile. When numerous DHCP leases
are assigned, an administrator can better track the leases when hostnames are used instead of devices.
To include hostnames in DHCP requests:
1. Select the Configuration tab from the Web UI.
2. Select Devices.
3. Select System Profile from the options on left-hand side of the UI.
4. Expand the Network menu and select Miscellaneous.
Figure 5-74 Network - Miscellaneous screen
5. Select the Include Hostname in DHCP Request option to include a hostname in a DHCP lease for a requesting device.
This feature is enabled by default.
6. Select the DHCP Persistent Lease option to retain the lease that was last used by the access point if the access point’s
DHCP server resource were to become unavailable. This feature is enabled by default.
7. Select the OK button located at the bottom right of the screen to save the changes. Select Reset to revert to the last saved
configuration.
Extended Power via MDI
Discovery
Select this option to include LLPD-MED extended power via MDI discovery TLV in LLDP
PDUs. This setting is disabled by default.
To Next Page
Loading...
